How to load new filament on Prusa 3D printer ?

Changing filament is really simple on a Prusa 3D printer. And it’s even easier because your favorite* 3D printing coach at SPOT has prepared a video showing you step by step how to perform this maneuver. Now it's your turn! Soon, the ancient art of 3D printing will hold no secrets for you!

How to change/load filament on a prusa printer ?

I know, this video showing the MK3 procedure is so 2022. Don't panic, the MK4/CORE One interface is even easier to use. In the main menu, just go to Filament. You can then unload the filament if necessary, or just Load filament if the printer is empty. The next steps are basically the same. Just follow the printer's instructions and be sure to purge one or two times.

On CORE One: There is a first sensor on the side of the printer. That can be hard to insert filament here so don't forget to cut the tip with a sharp angle to help you.

Easy!

And remember, the filament will give better results if it's dry! So please, put back your spool in the drying cabinet after printing, while being careful not to create tangles when handling the filament.

*The 3D printing coach didn't write that…