Differences

This shows you the differences between two versions of the page.

--- public:spot_-_3d_printing:prusaslicer_configuration [2026-01-19 10:00] – Sebastien Martinerie
+++ public:spot_-_3d_printing:prusaslicer_configuration [2026-09-04 13:32] (current) – Sebastien Martinerie
@@ Line 3: / Line 3: @@
 To maximize your chances of success in creating your most ambitious 3D prints and prototypes, your 3D printing coach has applied all his experience and expertise to create optimized filament profiles specifically for the filament-printer pairing available at SPOT. It is essential that you follow these instructions and use the SPOT filament profile because our filament is very special.
-:!:**WARNING: As we upgraded all MK4 printers to MK4S, everyone should include MK4S printers to their slicer configuration.**:!:
+:!:**WARNING: As we upgraded the 3D printing space with the addition of Prusa Core One printers, everyone should update his slicer with the new printers SPOT PETG_2026 filament setting !**:!:
@@ Line 11: / Line 11: @@
   * Follow the instructions to install the software.
-===== 2. Select the good 3D printer models  =====
+Note: Please don't install version 3.0.0 right now and wait for the final version.
-  - Once the software is installed: //**Menu -> Configuration -> Configuration Wizard...**//{{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_152035.png?nolink&600 |}}
+===== 2. Select the 3D printers you'll need  =====
-  - In the "//**Prusa Research**//" menu, select:
-"//**Original Prusa MK4S**//"
-"//**Original Prusa MK4 Input Shaper**//"
-"//**Original Prusa i3 MK3S & MK3S+**//"
-All with **0.4 mm nozzle**.
-:!: Make sure to select MK3S+, not MK3.5 or MK3.9 and make sure to **unselect any other printers** :!:
+  - Once the software is installed: //**Configuration -> Configuration Wizard**// {{ :public:spot_-_3d_printing:configuration_wizzard.png?600 |}}
-{{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_152925.png?nolink&600 |}}
-{{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_153619.png?nolink&600 |}}
+  - In the "//**Prusa Research**//" menu, select ONLY:
-  - In the menu "Prusa Research SLA" : unselect all printer {{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_153001.png?nolink&600 |}}
+  * **Prusa CORE One** with **HF0.4 mm** noozle
-  - In the menu "Filaments": unselect every filament settings by clicking on "None". Then, select PETG > Generic PETG.
+  * **Original Prusa MK4S** with **HF0.4 mm** noozle
- {{:public:spot_-_3d_printing:filament-none.png?nolink&600|}}
+{{ :public:spot_-_3d_printing:configuration_core_one.png?600 |}}
+{{ :public:spot_-_3d_printing:configuration_mk4s.png?600 |}}
+:!: **Unselect any unnecessary printer, including in SLA or other manufacturer menus** :!:
+. In the menu **"Filaments"**: unselect every filament settings by clicking on "None". Then, select PETG > Generic PETG.
+{{:public:spot_-_3d_printing:filament-none.png?nolink&600|}}
 {{:public:spot_-_3d_printing:filament-petg.png?nolink&600|}}
-  - Select //**Finish**//
+. Select //**Finish**//
 ===== 3. SPOT filament setting =====
-  - Download and unzip these two projects : {{ :public:spot_-_3d_printing:spot_settings_12.03.25.zip |}}
+  - Download and unzip this file : {{ :public:spot_-_3d_printing:spot_petg_2026.zip |}}
-  - Go to "//**menu -> file -> Open project...**//" and select one of the project you just downloaded
+  - Go to "//**menu -> file -> Open project...**//" and select SPOT PETG_2026.3mf you just downloaded
-  - Once the project is opened, go to the "Filament" menu (ensure the filament's printing temperatures have automatically adjusted as shown below) {{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_155345.png?nolink&600 |}}
+  - Once the project is opened, go to the "Filament" menu (ensure the filament's nozzle temperatures have automatically adjusted to 240-235°C)
-  - Save these presets and rename it "SPOT PETG - MK4IS" (if you opened the MK4IS project) or SPOT PETG - MK3S (if you opened the MK3S project){{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_160146.png?nolink&600 |}}
+  - Rename this preset "SPOT PETG_2026" {{ :public:spot_-_3d_printing:rename_spot_petg_2026.png?600 |}}
-  - Return on "Plater" view and you can now see and select the custom SPOT filament profile to print. {{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_160423.png?nolink&600 |}}
+  - Return on "Plater" view and you can now see and select the custom SPOT PETG_2026 filament profile to print. {{ :public:spot_-_3d_printing:confirmation_spot_petg.png?600 |}}
-  - Repeat the process for the second project you downloaded
+  - Check that this profile is available with Core One and MK4S printers.
+  - Remove all unnecessary filament settings if you have some.
 At the end of the process, **close PrusaSlicer** and reopen it before importing your parts.
+----
+**Congratulations! Now you have the best settings installed on your slicer and, normally, you will print good looking parts 8-)**
+Remember to select SPOT PETG filament setting everytime you print at SPOT!