Here are the available 3D printing materials at SPOT. PET-G is our filament by default. Some other filaments are installed on MK3 printers. Please read carefully the documentation and ask your coach if you use them for the first time.

For any other materials, please ask your coach.

PET-G

Standard general-purpose filament, made of recycled wastes. Easy to print with good overall properties. Perfect for most applications.

PrusaSlicer setting: SPOT-PETG (see SPOT configuration for PrusaSlicer)

Prints on: MK3S+, MK4, XL, PRO

Price: 0,05 CHF/g

SPOT-G (Available soon)

Made at SPOT from 100% recycled PET-G waste! Success of your print is not guaranteed, so use it for small, early version parts.

PrusaSlicer setting: SPOT-PETG

Prints on: MK3S+, MK4, XL

Price: TBD

TPU 85A

Flexible filament with a 85 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.

Print with glue on the printbed.

Tensile strength: yield at 4Mpa, ultimate at 26 MPa

Tensile modulus: 12 Mpa

Elongation at break: 660%

PrusaSlicer setting: NinjaTek Ninjaflex TPU

Prints on: MK3S+, XL

Price: 0,10 CHF/g