Available materials [MAKE wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Available materials ======



PET-G is our filament by default. Some other filaments are installed on MK3 printers. 
Please read carefully the documentation and ask your coach if you use them for the first time.

For any other materials, please ask your coach.

Note: Only the filaments you can print on open-access printers are listed on this page.

For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document: {{ :public:spot_-_3d_printing:listes_materiaux_2025.pdf |}}


----


**PET-G**

Standard general-purpose filament, made of recycled wastes. Easy to print with good overall properties. Perfect for most applications.

PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])

Prints on: MK3S+, MK4, XL, PRO

Price: 0,05 CHF/g

----

**SPOT-G (Available soon)**

Made at SPOT from [[public:spot_-_3d_printing:filament_recycling|100% recycled PET-G waste]]! Success of your print is not guaranteed, so use it for small, early version parts.

PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])

Prints on: TBD

Price: TBD

----

**TPU 85A**

Flexible filament with a 85 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.

**Print with glue on the printbed.**

PrusaSlicer setting: NinjaTek Ninjaflex TPU

Prints on: MK3S+, XL

Price: 0,10 CHF/g


----

**TPU 95A**

Flexible filament with a 95 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.

**Print with glue on the printbed.**

PrusaSlicer setting: Generic FLEX

Prints on: MK3S+, XL

Price: 0,10 CHF/g

----

**PETG-HT**

A translucent (or white) PETG material with higher temperature resistance (up to 100°C). For hot airflow, lighting designs, etc.

**Print with glue on the printbed.**

PrusaSlicer setting: ColorFabb HT

Prints on: MK3S+, XL, PRO

Price: 0,05 CHF/g

----

**PETG-PTFE**

PETG with 10% PTFE, with self-lubricating properties. For low friction applications, such as sliding elements and gears.

**Print with glue on the printbed.**

PrusaSlicer setting: Generic PETG

Prints on: MK3S+, XL, PRO

Price: 0,05 CHF/g