Differences

This shows you the differences between two versions of the page.

--- public:spot_-_3d_printing:available_materials [2025-09-04 15:27] – Sebastien Martinerie
+++ public:spot_-_3d_printing:available_materials [2025-09-05 07:39] (current) – Sebastien Martinerie
@@ Line 1: / Line 1: @@
-====== ====== Available materials ====== ======
+====== Available materials ======
-Here are the available 3D printing materials at SPOT.
 PET-G is our filament by default. Some other filaments are installed on MK3 printers.
 Please read carefully the documentation and ask your coach if you use them for the first time.
@@ Line 8: / Line 8: @@
 For any other materials, please ask your coach.
-====== Standard prototyping filaments ======
+Note: Only the filaments you can print on open-access printers are listed on this page.
+For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document: {{ :public:spot_-_3d_printing:listes_materiaux_2025.pdf |}}
+----
 **PET-G**
@@ Line 20: / Line 26: @@
 Price: 0,05 CHF/g
+----
 **SPOT-G (Available soon)**
-Made at SPOT from 100% recycled PET-G waste! Success of your print is not guaranteed, so use it for small, early version parts.
+Made at SPOT from [[public:spot_-_3d_printing:filament_recycling|100% recycled PET-G waste]]! Success of your print is not guaranteed, so use it for small, early version parts.
-PrusaSlicer setting: SPOT-PETG
+PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
-Prints on: MK3S+, MK4, XL
+Prints on: TBD
 Price: TBD
+----
 **TPU 85A**
@@ Line 36: / Line 44: @@
 Flexible filament with a 85 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.
-Print with glue on the printbed.
+**Print with glue on the printbed.**
-Tensile strength: yield at 4Mpa, ultimate at 26 MPa
+PrusaSlicer setting: NinjaTek Ninjaflex TPU
-Tensile modulus: 12 Mpa
+Prints on: MK3S+, XL
-Elongation at break: 660%
+Price: 0,10 CHF/g
-PrusaSlicer setting: NinjaTek Ninjaflex TPU
+----
+**TPU 95A**
+Flexible filament with a 95 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.
+**Print with glue on the printbed.**
+PrusaSlicer setting: Generic FLEX
 Prints on: MK3S+, XL
@@ Line 50: / Line 67: @@
 Price: 0,10 CHF/g
+----
+**PETG-HT**
+A translucent (or white) PETG material with higher temperature resistance (up to 100°C). For hot airflow, lighting designs, etc.
+**Print with glue on the printbed.**
+PrusaSlicer setting: ColorFabb HT
+Prints on: MK3S+, XL, PRO
+Price: 0,05 CHF/g
+----
+**PETG-PTFE**
+PETG with 10% PTFE, with self-lubricating properties. For low friction applications, such as sliding elements and gears.
+**Print with glue on the printbed.**
+PrusaSlicer setting: Generic PETG
+Prints on: MK3S+, XL, PRO
+Price: 0,05 CHF/g