public:spot_-_mechanics:light_burn_remote_desktop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
public:spot_-_mechanics:light_burn_remote_desktop [2025-05-02 14:57] – Julien Delislepublic:spot_-_mechanics:light_burn_remote_desktop [2025-05-06 11:42] (current) – Julien Delisle
Line 1: Line 1:
 ====== Lightburn access in remote desktop to prepare files ====== ====== Lightburn access in remote desktop to prepare files ======
  
-===== Connect to remote desktop from your computer to access Lightburn =====+In order to prepare your laser cuts, you can access remote computers with lightburn installed on it. See the [[https://make.epfl.ch/wiki/public/spot_-_laser_room/remote_desktop_to_prepare_laser_cut|following procedure]] for more information 
  
-To access Lightburn, you need first to take control of our remote computer (a physical machine on the network, not a VM) with a lightburn licence installed on it. 
  
-The steps to follow are: 
-  - Ensure you are connected to the EPFL network (wifi or VPN) 
-  - Go to the following webpage : [[https://make.epfl.ch/remote-pc|make.epfl.ch/remote-pc]] 
-  - Read the procedure on how to connect/disconnect properly + store data (see next chapter)  
-  - At the bottom of the webpage, click on **[[https://dllstisrv1.epfl.ch/remote-pc-special|Remotely (& possibly locally) accessible computers for special purposes]]** 
-  - The PC number **DLLSTIGEPC22** is the one with lightburn installed on it 
-  - Copy DLLSTIGEPC22 and paste it into the remote desktop app  
-  - Once connected to the computer, a shortcut to open lightburn is available on the desktop 
-{{ :public:spot_-_mechanics:capture.png?direct&400 |}} 
- 
- 
-===== Import your DXF or SVG file  ===== 
- 
-You have the following options to import your DXF or SVG documents into Lightburn (remote desktop) from your own laptop 
-  - Copy from your laptop, paste it on the remote computer 
-    - Get out of the remote desktop window (**Esc** key), go back to your own desktop 
-    - Copy your file from your computer 
-    - Go back on the window of the remote desktop and paste your file somewhere, open the file from lightburn 
-  - Browser option 
-    - Open a browser and access your email or a shared collaborative drive on which you can access your file   
-  - Install RDP config file (Best alternative if you plan to use the remote computer to prepare your files) 
-    -  
- 
-     
  
  
  • public/spot_-_mechanics/light_burn_remote_desktop.1746197847.txt.gz
  • Last modified: 2025-05-02 14:57
  • by Julien Delisle