Differences

This shows you the differences between two versions of the page.

--- public:spot_-_mechanics:light_burn_remote_desktop [2025-05-02 14:43] – Julien Delisle
+++ public:spot_-_mechanics:light_burn_remote_desktop [2025-05-06 11:42] (current) – Julien Delisle
@@ Line 1: / Line 1: @@
 ====== Lightburn access in remote desktop to prepare files ======
-===== Connect to remote desktop from your computer to access Lightburn =====
+In order to prepare your laser cuts, you can access remote computers with lightburn installed on it. See the [[https://make.epfl.ch/wiki/public/spot_-_laser_room/remote_desktop_to_prepare_laser_cut|following procedure]] for more information
-To access Lightburn, you need first to take control of the remote computer with a lightburn licence installed on it.
-  - Connected to the EPFL network (wifi or VPN)
-  - Go to the following webpage : [[https://make.epfl.ch/remote-pc|make.epfl.ch/remote-pc]]
-  - Read the procedure on how to connect/disconnect properly + store data (see next chapter)
-  - At the bottom of the webpage, click on **[[https://dllstisrv1.epfl.ch/remote-pc-special|Remotely (& possibly locally) accessible computers for special purposes]]**
-  - The PC number **DLLSTIGEPC22** is the one with lightburn installed on it
-  - Copy DLLSTIGEPC22 and paste it into the remote desktop app
-  - Once connected to the computer, a shortcut to open lightburn is available on the desktop
-  - {{ :public:spot_-_mechanics:capture.png?direct&400 |}}
-===== how  =====