Laser cutter: Available materials [MAKE wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Laser cutter: Available materials =====
Different materials are available at SPOT for the laser cutter, prices are available at the mechanical workshop.

If you are looking for a specific material, please come and ask your coaches.

^ Laser cutter      ^ Materials      ^ Max panel dim.         ^
|[[https://make.epfl.ch/equipment/117/aeon-nova16-co2-laser-cutter-117| Big CO2 laser cutter]]| Wood, Plastics| 1600x1000 mm<sup>2</sup>|
| [[https://make.epfl.ch/equipment/8/aeon-mira7-co2-laser-8|Small CO2 laser cutter]]| Wood, Plastics | 700x500 mm<sup>2</sup> |
| [[https://make.epfl.ch/equipment/116/glorious-gm0606-fiber-laser-116| Fiber laser cutter]]| Metals | 550x550 mm<sup>2</sup>|

The standard panel sizes that we have are:
  * **M:** 500x700 mm<sup>2</sup>
  * **L:** 800x900 mm<sup>2</sup>
  * **XL:** 1000x1600 mm<sup>2</sup>


----
//In the following sections, prices are displayed in CHF, depending on the material's thickness and panel's surface.// ======
----
==== Wood ====


^       MDF thickness in mm     ^ 3       ^ 4          ^ 5     ^ 6     ^ 8    ^ 10     ^ 12    ^ 
^ M | 4,5.- | 5.-  | 5,5.- | 6.- | 6,5.-| 7.- | 8,4.-|
^ L| 9.-  | 10.- | 11.- | 12.- | 13.- | 14.- | 15.-|
^ XL| 20.- | 22.-  | 24.- | 26.- | 28.- | 30.- | 32.-|
^ m<sup>2</sup>   | 12,3.-  | 13,4.-   | 14,5.- | 16,4.- | 17,3.- | 17,8.- | 20.-|

For stock management issues, we will always prefer to provide a student with a M or L panel, depending on the project's needs. In case of special need, we will sell a full XL panel or measure the surface of the cut part.

If you are looking for tainted MDF, please ask at SKIL.\\
If you are looking for a specific wood, please ask your coaches.



==== Plastic ====

^      PET thickness in mm       ^ 1       ^ 2          ^      ^      ^     ^      ^     ^  ^
^ XL | / | 35.-  |  |  | |  | |
^ m<sup>2</sup>| 11.-  | 21.- |  |  |  |  | |
^      PMMA thickness in mm      ^        ^ 2          ^ 3     ^ 4     ^ 5    ^ 6     ^ 8    ^ 10 ^
^ M |  | 8,5.-  | 10.- | 11.- | 17.- | 22.- | 30.-| 37.- |
^ XL|  | 35.-  | 50.- | 55.- | 70.- | 80.- | 100.-| 125.- |
^ m<sup>2</sup>  | | 23.-  | 27.-   | 30.- | 47.- | 62.- | 83.- | 104.-|

The panel size purchased might differ, and we might not be able to provide you with a "standard" panel. In that case, you will be charged depending on the surface you need (price / mm<sup>2</sup>)

If you are looking for tainted PMMA, please ask at SKIL.

==== Metal ====
:!: only for the[[https://make.epfl.ch/equipment/116/glorious-gm0606-fiber-laser-116| GM0606 Fiber laser cutter]], please contact your coaches to use it.

^      Al 5754 1/4 thickness in mm      ^1    ^1.5 ^2  ^2.5 ^3 ^4 ^5 ^
^ m<sup>2</sup>  |34.- |39.-  |45.- |56.- |61.- |73.- |102.- | 
^      Al 5005 1/2 thickness in mm    ^ ^ ^ ^2.5 ^3 ^4 ^5 ^
^ m<sup>2</sup>|| | |58.- |67.- |84.- |102.- |
^      Steel thickness in mm      ^1    ^1.5 ^2  ^2.5 ^3 ^4 ^5 ^
^ m<sup>2</sup>  |27.- |34.- |36.- |41.- |44.- |53.- |62.- |