Differences

This shows you the differences between two versions of the page.

--- public:spot_-_3d_printing:prusaslicer_configuration [2026-09-04 11:38] – Sebastien Martinerie
+++ public:spot_-_3d_printing:prusaslicer_configuration [2026-09-04 13:32] (current) – Sebastien Martinerie
@@ Line 15: / Line 15: @@
 ===== 2. Select the 3D printers you'll need  =====
-  - Once the software is installed: //**Menu -> Configuration -> Configuration Wizard...**//{{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_152035.png?nolink&600 |}}
+  - Once the software is installed: //**Configuration -> Configuration Wizard**// {{ :public:spot_-_3d_printing:configuration_wizzard.png?600 |}}
   - In the "//**Prusa Research**//" menu, select ONLY:
   * **Prusa CORE One** with **HF0.4 mm** noozle
@@ Line 41: / Line 42: @@
   - Go to "//**menu -> file -> Open project...**//" and select SPOT PETG_2026.3mf you just downloaded
   - Once the project is opened, go to the "Filament" menu (ensure the filament's nozzle temperatures have automatically adjusted to 240-235°C)
-  - Save this preset and rename it "SPOT PETG_2026"
+  - Rename this preset "SPOT PETG_2026" {{ :public:spot_-_3d_printing:rename_spot_petg_2026.png?600 |}}
-  - Return on "Plater" view and you can now see and select the custom SPOT PETG_2026 filament profile to print.
+  - Return on "Plater" view and you can now see and select the custom SPOT PETG_2026 filament profile to print. {{ :public:spot_-_3d_printing:confirmation_spot_petg.png?600 |}}
-  - Check that this profile is available with Core One and MK4S printers
+  - Check that this profile is available with Core One and MK4S printers.
+  - Remove all unnecessary filament settings if you have some.
 At the end of the process, **close PrusaSlicer** and reopen it before importing your parts.