Differences

This shows you the differences between two versions of the page.

--- public:spot_-_3d_printing:prusaslicer_configuration [2026-01-19 10:20] – Sebastien Martinerie
+++ public:spot_-_3d_printing:prusaslicer_configuration [2026-09-04 13:32] (current) – Sebastien Martinerie
@@ Line 3: / Line 3: @@
 To maximize your chances of success in creating your most ambitious 3D prints and prototypes, your 3D printing coach has applied all his experience and expertise to create optimized filament profiles specifically for the filament-printer pairing available at SPOT. It is essential that you follow these instructions and use the SPOT filament profile because our filament is very special.
-:!:**WARNING: As we upgraded all MK4 printers to MK4S, everyone should include MK4S printers to their slicer configuration.**:!:
+:!:**WARNING: As we upgraded the 3D printing space with the addition of Prusa Core One printers, everyone should update his slicer with the new printers SPOT PETG_2026 filament setting !**:!:
@@ Line 10: / Line 10: @@
   * Logically, to use a Prusa 3D printer, it’s recommended to use the software [[https://www.prusa3d.com/page/prusaslicer_424/| PrusaSlicer ]].
   * Follow the instructions to install the software.
+Note: Please don't install version 3.0.0 right now and wait for the final version.
 ===== 2. Select the 3D printers you'll need  =====
-  - Once the software is installed: //**Menu -> Configuration -> Configuration Wizard...**//{{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_152035.png?nolink&600 |}}
+  - Once the software is installed: //**Configuration -> Configuration Wizard**// {{ :public:spot_-_3d_printing:configuration_wizzard.png?600 |}}
-  - In the "//**Prusa Research**//" menu, select:
-  * "//**Original Prusa MK4S**//"
+  - In the "//**Prusa Research**//" menu, select ONLY:
-  * "//**Original Prusa MK4 Input Shaper**//" (used for printing with SPOTG recycled filament)
+  * **Prusa CORE One** with **HF0.4 mm** noozle
-  * "//**Original Prusa i3 MK3S & MK3S+**//"
+  * **Original Prusa MK4S** with **HF0.4 mm** noozle
-  * All with **0.4 mm nozzle**
+{{ :public:spot_-_3d_printing:configuration_core_one.png?600 |}}
+{{ :public:spot_-_3d_printing:configuration_mk4s.png?600 |}}
+:!: **Unselect any unnecessary printer, including in SLA or other manufacturer menus** :!:
-:!: Make sure to select MK3S+, not MK3.5 or MK3.9 and make sure to **unselect any other printers** :!:
+. In the menu **"Filaments"**: unselect every filament settings by clicking on "None". Then, select PETG > Generic PETG.
-{{ :public:spot_-_3d_printing:capture_d_ecran_2026-01-19_105611.png?nolink&600 |}}
-{{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_153619.png?nolink&600 |}}
-. In the menu "Prusa Research SLA" : unselect all printers {{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_153001.png?nolink&600 |}}
+{{:public:spot_-_3d_printing:filament-none.png?nolink&600|}}
-. In the menu **"Filaments"**: unselect every filament settings by clicking on "None". Then, select PETG > Generic PETG.
- {{:public:spot_-_3d_printing:filament-none.png?nolink&600|}}
 {{:public:spot_-_3d_printing:filament-petg.png?nolink&600|}}
 . Select //**Finish**//
 ===== 3. SPOT filament setting =====
-  - Download and unzip these 3 projects : {{ :public:spot_-_3d_printing:16.01.26_spot_petg_settings.zip |}}
+  - Download and unzip this file : {{ :public:spot_-_3d_printing:spot_petg_2026.zip |}}
-  - Go to "//**menu -> file -> Open project...**//" and select one of the project you just downloaded
+  - Go to "//**menu -> file -> Open project...**//" and select SPOT PETG_2026.3mf you just downloaded
-  - Once the project is opened, go to the "Filament" menu (ensure the filament's nozzle temperatures have automatically adjusted to 230-235°C)
+  - Once the project is opened, go to the "Filament" menu (ensure the filament's nozzle temperatures have automatically adjusted to 240-235°C)
-  - Save these presets and rename it "SPOT PETG - MK4S" or "SPOT PETG - MK4IS" or "SPOT PETG - MK3S" depending on which project you opened {{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_160146.png?nolink&600 |}}
+  - Rename this preset "SPOT PETG_2026" {{ :public:spot_-_3d_printing:rename_spot_petg_2026.png?600 |}}
-  - Return on "Plater" view and you can now see and select the custom SPOT filament profile to print. {{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_160423.png?nolink&600 |}}
+  - Return on "Plater" view and you can now see and select the custom SPOT PETG_2026 filament profile to print. {{ :public:spot_-_3d_printing:confirmation_spot_petg.png?600 |}}
-  - Repeat the process for the other printer models (other projects of the zip file).
+  - Check that this profile is available with Core One and MK4S printers.
+  - Remove all unnecessary filament settings if you have some.
 At the end of the process, **close PrusaSlicer** and reopen it before importing your parts.