Differences

This shows you the differences between two versions of the page.

--- public:spot_-_3d_printing:prusaslicer_configuration [2024-09-09 11:56] – Sebastien Martinerie
+++ public:spot_-_3d_printing:prusaslicer_configuration [2025-03-12 18:12] (current) – [3. SPOT filament setting] Sebastien Martinerie
@@ Line 21: / Line 21: @@
 ===== 3. SPOT filament setting =====
-  - Download and unzip these two projects : {{ :public:spot_-_3d_printing:spot_settings.zip |}}
+  - Download and unzip these two projects : {{ :public:spot_-_3d_printing:spot_settings_12.03.25.zip |}}
   - Go to "//**menu -> file -> Open project...**//" and select one of the project you just downloaded
   - Once the project is opened, go to the "Filament" menu (ensure the filament's printing temperatures have automatically adjusted as shown below) {{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_155345.png?nolink&600 |}}
   - Save these presets and rename it "SPOT PETG - MK4IS" (if you opened the MK4IS project) or SPOT PETG - MK3S (if you opened the MK3S project){{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_160146.png?nolink&600 |}}
-  - Return on "Plater" view and you can now see and select the custom SPOT filament profil to print. {{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_160423.png?nolink&600 |}}
+  - Return on "Plater" view and you can now see and select the custom SPOT filament profile to print. {{ :public:spot_-_3d_printing:capture_d_ecran_2024-09-07_160423.png?nolink&600 |}}
   - Repeat the process for the second project you downloaded
+At the end of the process, **close PrusaSlicer** and reopen it before importing your parts.