Differences

This shows you the differences between two versions of the page.

--- public:spot_-_3d_printing:available_materials [2025-09-04 16:01] – Sebastien Martinerie
+++ public:spot_-_3d_printing:available_materials [2026-09-03 09:41] (current) – Sebastien Martinerie
@@ Line 3: / Line 3: @@
-PET-G is our filament by default. Some other filaments are installed on MK3 printers.
+PET-G is our filament by default. Some other filaments can be installed on MK4S printers.
 Please read carefully the documentation and ask your coach if you use them for the first time.
+Also, never forget to **unload and store** the filament properly after each print please.
 For any other materials, please ask your coach.
@@ Line 10: / Line 12: @@
 Note: Only the filaments you can print on open-access printers are listed on this page.
-For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document: {{ :public:spot_-_3d_printing:listes_materiaux_2025.pdf |}}
+For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document: {{ :public:spot_-_3d_printing:listes_materiaux_2026.pdf |}}
@@ Line 20: / Line 22: @@
 Standard general-purpose filament, made of recycled wastes. Easy to print with good overall properties. Perfect for most applications.
-PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
+PrusaSlicer setting: SPOT PETG_2026 (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
-Prints on: MK3S+, MK4, XL, PRO
+Prints on: MK4S, Core One, XL, PRO
 Price: 0,05 CHF/g
@@ Line 28: / Line 30: @@
 ----
-**SPOT-G (Available soon)**
+**SPOT-G (ask for availability)**
 Made at SPOT from [[public:spot_-_3d_printing:filament_recycling|100% recycled PET-G waste]]! Success of your print is not guaranteed, so use it for small, early version parts.
-PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
+PrusaSlicer setting: SPOT PETG_2026 (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
-Prints on: MK3S+, MK4, XL
+Prints on: MK4S only
 Price: TBD
@@ Line 48: / Line 50: @@
 PrusaSlicer setting: NinjaTek Ninjaflex TPU
-Prints on: MK3S+, XL
+Prints on: MK4S, XL
-Price: 0,10 CHF/g
+Price: 0,05 CHF/g
@@ Line 63: / Line 65: @@
 PrusaSlicer setting: Generic FLEX
-Prints on: MK3S+, XL
+Prints on: MK4S, XL
-Price: 0,10 CHF/g
+Price: 0,05 CHF/g
 ----
@@ Line 77: / Line 79: @@
 PrusaSlicer setting: ColorFabb HT
-Prints on: MK3S+, XL, PRO
+Prints on: MK4S, XL, PRO
 Price: 0,05 CHF/g
@@ Line 91: / Line 93: @@
 PrusaSlicer setting: Generic PETG
-Prints on: MK3S+, XL, PRO
+Prints on: MK4S, XL, PRO
 Price: 0,05 CHF/g