Differences

This shows you the differences between two versions of the page.

--- public:spot_-_3d_printing:available_materials [2025-09-04 15:34] – Sebastien Martinerie
+++ public:spot_-_3d_printing:available_materials [2025-09-05 07:39] (current) – Sebastien Martinerie
@@ Line 3: / Line 3: @@
-Here are the available 3D printing materials at SPOT.
 PET-G is our filament by default. Some other filaments are installed on MK3 printers.
 Please read carefully the documentation and ask your coach if you use them for the first time.
@@ Line 9: / Line 8: @@
 For any other materials, please ask your coach.
-Only the filaments you can print on open-access printers are listed on this page.
+Note: Only the filaments you can print on open-access printers are listed on this page.
-For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document.
+For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document: {{ :public:spot_-_3d_printing:listes_materiaux_2025.pdf |}}
@@ Line 31: / Line 30: @@
 **SPOT-G (Available soon)**
-Made at SPOT from 100% recycled PET-G waste! Success of your print is not guaranteed, so use it for small, early version parts.
+Made at SPOT from [[public:spot_-_3d_printing:filament_recycling|100% recycled PET-G waste]]! Success of your print is not guaranteed, so use it for small, early version parts.
 PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
-Prints on: MK3S+, MK4, XL
+Prints on: TBD
 Price: TBD
@@ Line 67: / Line 66: @@
 Price: 0,10 CHF/g
+----
+**PETG-HT**
+A translucent (or white) PETG material with higher temperature resistance (up to 100°C). For hot airflow, lighting designs, etc.
+**Print with glue on the printbed.**
+PrusaSlicer setting: ColorFabb HT
+Prints on: MK3S+, XL, PRO
+Price: 0,05 CHF/g
+----
+**PETG-PTFE**
+PETG with 10% PTFE, with self-lubricating properties. For low friction applications, such as sliding elements and gears.
+**Print with glue on the printbed.**
+PrusaSlicer setting: Generic PETG
+Prints on: MK3S+, XL, PRO
+Price: 0,05 CHF/g