Differences

This shows you the differences between two versions of the page.

--- public:spot_-_3d_printing:available_materials [2025-09-04 15:32] – Sebastien Martinerie
+++ public:spot_-_3d_printing:available_materials [2026-09-03 09:41] (current) – Sebastien Martinerie
@@ Line 3: / Line 3: @@
-Here are the available 3D printing materials at SPOT.
+PET-G is our filament by default. Some other filaments can be installed on MK4S printers.
-PET-G is our filament by default. Some other filaments are installed on MK3 printers.
 Please read carefully the documentation and ask your coach if you use them for the first time.
+Also, never forget to **unload and store** the filament properly after each print please.
 For any other materials, please ask your coach.
-Only the filaments you can print on open-access printers are listed on this page.
+Note: Only the filaments you can print on open-access printers are listed on this page.
-For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document.
+For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document: {{ :public:spot_-_3d_printing:listes_materiaux_2026.pdf |}}
@@ Line 21: / Line 22: @@
 Standard general-purpose filament, made of recycled wastes. Easy to print with good overall properties. Perfect for most applications.
-PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
+PrusaSlicer setting: SPOT PETG_2026 (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
-Prints on: MK3S+, MK4, XL, PRO
+Prints on: MK4S, Core One, XL, PRO
 Price: 0,05 CHF/g
+----
+**SPOT-G (ask for availability)**
-**SPOT-G (Available soon)**
+Made at SPOT from [[public:spot_-_3d_printing:filament_recycling|100% recycled PET-G waste]]! Success of your print is not guaranteed, so use it for small, early version parts.
-Made at SPOT from 100% recycled PET-G waste! Success of your print is not guaranteed, so use it for small, early version parts.
+PrusaSlicer setting: SPOT PETG_2026 (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
-PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
+Prints on: MK4S only
-Prints on: MK3S+, MK4, XL
 Price: TBD
+----
 **TPU 85A**
@@ Line 49: / Line 50: @@
 PrusaSlicer setting: NinjaTek Ninjaflex TPU
-Prints on: MK3S+, XL
+Prints on: MK4S, XL
-Price: 0,10 CHF/g
+Price: 0,05 CHF/g
+----
+**TPU 95A**
+Flexible filament with a 95 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.
+**Print with glue on the printbed.**
+PrusaSlicer setting: Generic FLEX
+Prints on: MK4S, XL
+Price: 0,05 CHF/g
+----
+**PETG-HT**
+A translucent (or white) PETG material with higher temperature resistance (up to 100°C). For hot airflow, lighting designs, etc.
+**Print with glue on the printbed.**
+PrusaSlicer setting: ColorFabb HT
+Prints on: MK4S, XL, PRO
+Price: 0,05 CHF/g
+----
+**PETG-PTFE**
+PETG with 10% PTFE, with self-lubricating properties. For low friction applications, such as sliding elements and gears.
+**Print with glue on the printbed.**
+PrusaSlicer setting: Generic PETG
+Prints on: MK4S, XL, PRO
+Price: 0,05 CHF/g