public:spot_-_3d_printing:available_materials

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
public:spot_-_3d_printing:available_materials [2025-09-04 13:49] – removed - external edit (Unknown date) 127.0.0.1public:spot_-_3d_printing:available_materials [2025-09-05 07:39] (current) – Sebastien Martinerie
Line 1: Line 1:
 +====== Available materials ======
 +
 +
 +
 +PET-G is our filament by default. Some other filaments are installed on MK3 printers. 
 +Please read carefully the documentation and ask your coach if you use them for the first time.
 +
 +For any other materials, please ask your coach.
 +
 +Note: Only the filaments you can print on open-access printers are listed on this page.
 +
 +For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document: {{ :public:spot_-_3d_printing:listes_materiaux_2025.pdf |}}
 +
 +
 +----
 +
 +
 +**PET-G**
 +
 +Standard general-purpose filament, made of recycled wastes. Easy to print with good overall properties. Perfect for most applications.
 +
 +PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
 +
 +Prints on: MK3S+, MK4, XL, PRO
 +
 +Price: 0,05 CHF/g
 +
 +----
 +
 +**SPOT-G (Available soon)**
 +
 +Made at SPOT from [[public:spot_-_3d_printing:filament_recycling|100% recycled PET-G waste]]! Success of your print is not guaranteed, so use it for small, early version parts.
 +
 +PrusaSlicer setting: SPOT-PETG (see [[public:spot_-_3d_printing:prusaslicer_configuration]])
 +
 +Prints on: TBD
 +
 +Price: TBD
 +
 +----
 +
 +**TPU 85A**
 +
 +Flexible filament with a 85 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.
 +
 +**Print with glue on the printbed.**
 +
 +PrusaSlicer setting: NinjaTek Ninjaflex TPU
 +
 +Prints on: MK3S+, XL
 +
 +Price: 0,10 CHF/g
 +
 +
 +----
 +
 +**TPU 95A**
 +
 +Flexible filament with a 95 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.
 +
 +**Print with glue on the printbed.**
 +
 +PrusaSlicer setting: Generic FLEX
 +
 +Prints on: MK3S+, XL
 +
 +Price: 0,10 CHF/g
 +
 +----
 +
 +**PETG-HT**
 +
 +A translucent (or white) PETG material with higher temperature resistance (up to 100°C). For hot airflow, lighting designs, etc.
 +
 +**Print with glue on the printbed.**
 +
 +PrusaSlicer setting: ColorFabb HT
 +
 +Prints on: MK3S+, XL, PRO
 +
 +Price: 0,05 CHF/g
 +
 +----
 +
 +**PETG-PTFE**
 +
 +PETG with 10% PTFE, with self-lubricating properties. For low friction applications, such as sliding elements and gears.
 +
 +**Print with glue on the printbed.**
 +
 +PrusaSlicer setting: Generic PETG
 +
 +Prints on: MK3S+, XL, PRO
 +
 +Price: 0,05 CHF/g
 +
 +