PET-G is our filament by default. Some other filaments are installed on MK3 printers. Please read carefully the documentation and ask your coach if you use them for the first time.
For any other materials, please ask your coach.
Note: Only the filaments you can print on open-access printers are listed on this page.
For complete list and properties of our materials, including engineering-grade filaments and SLA resins, please download this document: listes_materiaux_2025.pdf
PET-G
Standard general-purpose filament, made of recycled wastes. Easy to print with good overall properties. Perfect for most applications.
PrusaSlicer setting: SPOT-PETG (see SPOT configuration for PrusaSlicer)
Prints on: MK3S+, MK4, XL, PRO
Price: 0,05 CHF/g
SPOT-G (Available soon)
Made at SPOT from 100% recycled PET-G waste! Success of your print is not guaranteed, so use it for small, early version parts.
PrusaSlicer setting: SPOT-PETG (see SPOT configuration for PrusaSlicer)
Prints on: TBD
Price: TBD
TPU 85A
Flexible filament with a 85 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.
Print with glue on the printbed.
PrusaSlicer setting: NinjaTek Ninjaflex TPU
Prints on: MK3S+, XL
Price: 0,10 CHF/g
TPU 95A
Flexible filament with a 95 shore A hardness. Ideal for flexible parts, tyres, bumpers, etc.
Print with glue on the printbed.
PrusaSlicer setting: Generic FLEX
Prints on: MK3S+, XL
Price: 0,10 CHF/g
PETG-HT
A translucent (or white) PETG material with higher temperature resistance (up to 100°C). For hot airflow, lighting designs, etc.
Print with glue on the printbed.
PrusaSlicer setting: ColorFabb HT
Prints on: MK3S+, XL, PRO
Price: 0,05 CHF/g
PETG-PTFE
PETG with 10% PTFE, with self-lubricating properties. For low friction applications, such as sliding elements and gears.
Print with glue on the printbed.
PrusaSlicer setting: Generic PETG
Prints on: MK3S+, XL, PRO
Price: 0,05 CHF/g